RotoClip ZFHS

Description

The EP-Arms RotoClip was specially developed for combination and standard hunting rifles. With a guaranteed repeat accuracy of +/- 0.1 mm, it is the only adapter of its kind on the market.

The system, for which a worldwide patent application has been filed, is characterized by clever features such as fine centering when inserting the threaded insert, the interrupted round thread and the half-shell clamping on the objective of the riflescope. Due to the very small clamping width of 15 mm (short) – 25 mm (long), a combination with attachments is also possible, which no manufacturer on the market has yet managed to do.

Another significant advantage is that it can be used multiple times on different scopes without re-shooting (only initial adjustment required). An example: You have a riflescope with an outer diameter of 62 mm and another one with an outer diameter of 56 mm. All you need is another adapter in the corresponding size of your riflescope and you can swap your device without removing the adapter.

Instructions for installation and commissioning:

The adapter is firmly attached to the lens of the riflescope with 4-6 M3 screws with a tightening force of 1.8 Nm. The adapter must be aligned before use. As before, this is done via the auxiliary cross of the attachment (thermal image). With night vision devices, pay attention to what the manufacturer of the devices specifies (orientation of the switch, e.g. 12 o’clock).

Once you have made the alignment, you can start test firing and correct the alignment of the adapter if necessary.

If you are satisfied with the result, you can now proceed in the same way on your second scope. Attention!!!! Please do not correct your thermal imaging camera again, but align your adapter so that the auxiliary cross matches your reticle, as with your first riflescope.

Shoot again and you will see that there are no significant deviations.